Assemble The Freezer Drawer - Samsung Rf266 Mode D'emploi

Setting up your French Door Refrigerator
ASSEMbLE THE FREEzER DRAWER
1. Pull out the rails to the full length on each side of the cabinet evenly.
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket (
the rail system.
5. Hook the ends of the tilting pocket (
and push down until they lock into place.
12_ Setting Up
DA68-01812H.indb 12
) into
6
) into both brackets ( ),
7 8
Slot
Slot
Slot
Slot
Slot
Slot
6
7
8
2009.8.10 9:4:12 AM