Publicité
Les langues disponibles
Les langues disponibles
Setting a Turn-On
Timer
Setting a Turn-Off
Timer
Ventilation
Mode
Auto Swing
Night Display
Child Lock
Defrost
Function
Water Tank
Full
CONTINUOUS DRAINING
- -
To connect the drain hose to the unit:
1.
Insert one end of the hose into the continuous drainage hole of the unit. Ensure it is
connected securely.
2.
Place the other end of the hose into a bucket or a drain.
3.
Ensure the hose is not bent or blocked.
Note: Gravity will pull the water out of the unit into your chosen drainage area. Ensure the
chosen area is not higher than the unit.
EMPTYING THE WATER TANK
- -
•
When the water tank is full, the unit will make a buzzing sound, and the Water Tank Full
When the dehumidifier is off, press the timer button, then use the + and -
buttons to set the number of hours before you want it to turn on. The timer
light will illuminate when a timer is set.
When the dehumidifier is on, press the timer button, then use the + and -
buttons to set the number of hours before you want it to turn off. The timer
light will illuminate when a timer is set.
Press this button to activate ventilation mode. The corresponding indicator
will illuminate. In this mode, the fan operates without the compressor,
circulating air in the room.
Press this button to activate the auto swing function. The air deflector will
automatically start swinging and creating flows of air throughout.
Press the Night Display button to activate the sleep function while the
machine is still operating in any mode. All lights except the sleep light,
water full light, and child lock light will turn off. Press any key in sleep mode
to perform functions and wake up the machine.
Press and hold both the Auto Swing and Ventilation buttons for a few
seconds to activate or deactivate the Child Lock function. When the child
lock is activated, the LED displays "LC" and flashes for 5 seconds, then
resumes normal display. Pressing other keys in the child lock state will
display "LC" and flash for 5 seconds as a reminder. Pressing the power
button in the child lock state can turn the machine on or off.
Frost may build up on the evaporator coils, which is normal. When this
happens, the automatic defrost function starts. The compressor turns
off, and the fan continues to run until the frost is removed. The defrosting
duration depends on the room temperature.
When the water tank is full, the water full indicator symbol will be
displayed, the buzzer will beep 20 times, and both the compressor and fan
will be automatically stopped after a few minutes.
English | 11 of 105
Publicité
