Installation Precautions - Essilor CP550EA Manuel D'utilisation

8. Introduction
This manual provides information on the procedures to be implemented to ensure adequate and optimal operations
of your CP550test projector.
Before conducting any tests and/or calibrations, please read the instructions carefully. This document serves as
both a reference guide and user's manual, be sure to keep it handy at all times.
The information presented in this document is not contractually binding and has been provided for reference
purposes only. It may be modified without prior notification. A document of this type might contain errors or
omissions, despite all the efforts undertaken to avoid such an eventuality. Under no circumstances can ESSILOR be
held liable for operating flaws potentially resulting from said errors or omissions.
8.1.

Installation precautions

When your CP550is not in use, be sure to protect it with the cover provided.
Abide by all use and storage conditions within the following ranges:
Use:
-
Temperature: +10° C to +40° C
Relative humidity: 30% to 85%
Storage:
-
Temperature: -10° C to +55°C
Relative humidity: below 70%
Always prevent condensation from forming.
When using or storing the device, place it in a safe and stable location. Avoid places that are exposed to dust,
gas, salt or sulfur.
Do not set up the CP550near any explosive or flammable substance.
Protect the device from all vibrations and shocks.
Whenever moving the projector, be sure to protect it from shocks by using the original packaging.
Never place flammable objects on top of the CP550, as fire could break out.
Before discarding the product packaging, sort the various materials and proceed in compliance with national or
local legislation.
Do not touch any of the optical parts due to the risk of irreversibly impairing calibration accuracy.
Insert the power supply plug into both the socket and device tightly. The projector must, without exception, be
connected to an electrical power network with a ground.
When moving the CP550, first turn off the power switch then unplug the electrical cable.
When turning the projector lamp on, never look through the projector lens.
ESSILOR UMCP550 V1 OCT2015
13