Safety Precautions; Transport - EBARA SWS Série Manuel D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
INSTALLATION AND MAINTENANCE MANUAL
(Instructions based on Spanish)

1. SAFETY PRECAUTIONS

This symbol together with one of the following words "Warning" or "Danger" indicates the risk level deriving from
failure to observe the prescribed safety precautions:
DANGER risk of electric shock (Warns that failure to observe the precautions involves a risk of
DANGER (Warns that failure to observe the precautions involves a risk of damage to persons or
WARNING (Warns that failure to observe the precautions involves a risk of damaging the pump or
2. WARNINGS
Before carrying out the installation, please read this instruction manual carefully.
It is essential that both the electrical installation and the connections are performed by qualified personnel,
who possess the required technical expertise required by the specific safety regulations for the project,
installation and maintenance of the technical installations for the country where the product is to be installed.
Any non-compliance with the safety regulations, in addition to being a danger to personnel and causing damage to
the equipment, will cancel all rights to interventions covered by the guarantee.
- The device is not designed for use by persons (including children) with physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they are supervised and instructed by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
3. APPLICATIONS AND USE
Self-induction electric pump for swimming pools, incorporating large capacity pre-filter with high filtration capability.
Transparent, polycarbonate filter cover allowing easy observation of the inside of the pre-filter basket.
Our pumps have been developed for continuous operation and the materials used in their manufacture are subjected
to strict controls and are rigorously verified.
The machine has been designed to pump water that is free from explosive substances, with a density equivalent to 1000
Kg/m
and a kinematic viscosity of 1 mm
3
It has no uses other than the one previously described.
4. TECHNICAL DATA AND LIMITATIONS OF USE
Power supply voltage:
Motor Protection: "IP 55"
Insulation class: Class "F"
MAXIMUM ENVIRONMENTAL TEMP.:
MAXIMUM PUMPED LIQUID TEMP.:

5. TRANSPORT

Do not subject the products to unnecessary bumps and knocks.
When lifting and transporting the unit, use machines and tools that have been designed for this purpose, using the
pallet supplied as standard (if present).
electric shock)
things)
the instalation)
/s, as well as chemically non-aggressive liquids.
2
Single-phase, 230 V, 50/60 Hz.
Three-phase, 230 - 400 V, 50/60 Hz.
+40ºC
+40ºC
See data plate
7
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Swt série

Table des Matières