Installation Requirements - Villeroy & Boch ViClean-I 100 Manuel D'installation

4 Installation requirements

Important
The power and water supplies must be switched off before installation.
Make sure that installation has been finished completely before connecting ViClean-I 100 to the power and water
•
supplies.
Make sure that the connection parts of the water supply hose are not damaged.
•
Use ViClean - I100 solely in a line pressure range between 0.1 MPa (dynamic) and 1.0 MPa (static),
•
"Technical data", page
Use ViClean-I 100 solely in a water temperature range between 10 °C and 35 °C,
•
The ambient temperature must be between 15 °C and 40 °C,
•
There can be a small quantity of water still inside the product due to the water flow test carried out in the factory.
•
This water does not, however, constitute a product defect.
Important
These instructions describe the installation of ViClean with ViConnect. If you intend to
use an installation system from another manufacturer, read the respective instructions.
Installation requirements,
22
20.
see page 86.
see "Technical data", page
see "Technical data", page
www.villeroy-boch.com // V 1.0 // 26.04.2018 // V0E100R1
see
20.
20.