Yealink MeetingBar A30 Ki Guide De Démarrage Rapide page 9

Pair with the CTP18 (Optional)
For a better pairing experience, we recommend starting the A30 endpoint first and then the CTP18.
If you purchased a combination kit, MeetingBar A30 and CTP18 would be paired automatically. You
can go to step 2 directly.
1. Pair manually: On the CTP18, enter the IP address of the MeetingBar A30 on display.
2. Initialize language, network, time zone, and auto update, and select the desired platform.
If you select Device Mode, skip to the
3. Account login (Contact the corresponding service provider to obtain an account)
Teams:
① Sign in the same Microsoft Teams account on both CTP18 and MeetingBar A30.
Method 1: Sign in the website
Find a networked computer and operate it
according to the interface prompts of CTP18 and
MeetingBar A30.
② Select the desired endpoint on the CTP18.
③ Enter the pairing code displayed on the endpoint on CTP18 and complete pairing.
Zoom: Follow the prompts on CTP18 to sign in account.
CTP18
Device Mode
section.
Method 2: Sign on the device
Use the remote control to operate if your display
does not support touch.
CTP18 Pair Video
(Teams)
6
MeetingBar A30
CTP18 Pair Video
(Zoom)