Publicité
Les langues disponibles
Les langues disponibles
shoulder and chest, and NOT across child's face or
neck.
5. Thread both sides of the lap belt under BOTH armrests.
Thread the lower end of the shoulder belt under the
armrest on the buckle side ❹. ENSURE that the
belt is snug across the child's hips. It is important to
ensure that any lap strap is worn low down, so that
the pelvis is firmly engaged, just touching their thighs
and is NOT across their stomach.
6. Buckle the vehicle seat belt into place and ensure it is
secure by gently pulling on it.
!
BOTH SIDES OF THE LAP BELT MUST PASS UNDER
BOTH ARMRESTS, AND THE LOWER END OF THE
SHOULDER BELT MUST PASS UNDER THE ARMREST
ON THE BUCKLE SIDE.
!
Any straps holding the restraint to the vehicle should
be tight, any straps restraining the child should be
adjusted to the child's body, and all straps should not
be twisted.
!
NEVER USE A VEHICLE LAP-ONLY BELT WHEN USING
THIS BOOSTER SEAT.
!
WARNING: To avoid possible entanglement hazard,
see "Entanglement with vehicle seat belt".
ENTANGLEMENT WITH VEHICLE SEAT BELT
!
WARNING: To avoid possible entanglement and
choking with your vehicle's shoulder belts, Harmony
Juvenile Products recommends that the following
precautions are taken when installing your booster seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
2. SLOWLY let the seat belt retract until it is snug against
your child.
3. ENSURE that the seat belts do not press on the
child's flesh or push the child's body into an unnatural
position.
22
Publicité
