KRESS MISSION KR172E.A Mode D'emploi page 16

If you need to replace the battery, follow these
steps: (Only for KR174E)
1. Gently turn your Mission
2. Remove the screws on the battery cover.
Remove the battery cover.
3. Remove the screws on the sheet metal.
Remove the sheet metal.
4. Unplug the connector. Replace the old battery
with the new one. Then plug the connector.
16
EN
5. Refit the sheet metal. Place the cover back in
its position and tighten the screws.
RTK upside down.
TM n