Hkoenig MG30 Manuel D'utilisation page 8

CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance
before cleaning. To protect against electrical
shock, do not immerse cord, plug or unit in
water or liquid. After each use, always make
sure plug is first removed from wall outlet.
1) Clean all detachable parts after each use in
hot, sudsy water.
2) Wipe the product's exterior surface with a
soft, damp cloth to remove stains.
3) Water droplets may buildup in the area
above the funnel and drip onto the product
base during brewing. To control the dripping,
wipe off the area with a clean, dry cloth after
each use of the product.
4) Use a damp cloth to gently wipe the keeping
warm plate. Never use abrasive cleaner to clean
it.
5) Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the mineral
deposits left by the water regularly according to the water quality in your area and the
frequency use the appliance, the detail is as follows:
1. Fill the water tank with water and descaler to the maximum level in the gauge of
coffee maker (the scale of water and descaler is 4:1, the detail refers to the instruction
of descaler. Please use "household descaler", you can use the citric acid instead of the
descaler (the one hundred parts of water and three parts of citric acid).
2. Place the carafe on the keeping warm plate, pay attention to let center line of carage
aligns with that of brew basket.
3. Press the on/auto/off button once and the indicator in it will be illuminated red. After
a while, water will drop out automatically.