Atlas Copco ETDST101-500-20-T40 Mode D'emploi page 10

Service
Lubrication
Planetary gears, needle bearings and ball bearings must be lubricated with soft grease containing molyb-
denumdisulphide at the regular overhaul of the tool.
Lubrication
Lubricate specially gears and clutch with grease containing molybdenum disulphide (e.g. Molykote BR2
Plus). Please see exploded views. Lubricate o-rings and threaded connections with grease before assem-
bling.
Lubricating guide
Brand
Molycote
CRC
Brand
Molycote
Almagard
Repair
Repair
Repair must only be carried out by qualified authorised personnel. For further information contact your lo-
cal Atlas Copco sales representative.
10
EN
Cable nut
Litium grease No. 3020
Angle gears
Longterm 2 plus
© Atlas Copco Industrial Technique AB - 9836 8100 00
ETDST101-500-20-T40
Gears
BR2 Plus
General purpose
LE 3751