Télécharger Imprimer la page

Blomberg BRFT1622 Serie Manuel D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

Connecting the water line to the water supply
• Connect the water line to a water supply valve.
If a valve is not present or you are not sure, consult
a quali ed plumber.
Connecting the water hose to the refrigerator
1. Slip the union (B) on to the water hose (A)
2. Push the water hose downwards rmly to slip it onto the
water inlet valve (C).
3.Tighten the union (C) by hand to ecure it onto the water
inlet valve.Normally, you are not required to tighten the
union with a tool.However, you can use a wrench or pliers
to tighten the union if there is a leakage.
WARNING:
water supply only.
WARNING:
Water Only.
Compliance with RoHS Directive :
• The product you have purchased complies with EU RoHS
Directive(2011/65/EU). It does not contain harmful and
proibited materials speci ed in the Directive.
DANGER:
Flammable refrigerant used. Do not
use mechanical devices to defrost
refrigerator. Do not puncture
refrigerant tubing".
Connect to potable
Fill With Potable
Risk of re or explosion.
DANGER:
Flammable refrigerant used.To be
repaired only by trained service
personnel. Do not puncture Use only
manufacturer-authorized service parts.
Any repair equipment used must be
designed for ammable refrigerants.
Follow all manufacturer repair
instructions
CAUTION :
Changing the illumination lamp
To change the Bulb/LED used for illumination of your
refrigerator, call your Authorized Service. The lamp(s) used in
this appliance is not suitable for house hold room illumination.
The intended purpose ofthis lamp is to assist the user to place
food stuffs in the refrigerator food stuffs in the
refrigerator/freezer in a safe and comfortable way.The lamps
used in this appliance have to withstand extreme physical
conditions such as temperatures below -20 °C. (only chest and
upright freezer)
Electrical connection
WARNING:
conection via extension cable or
multi-plus.
WARNING:
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be installed
side by side there should be at
1.5 inches distance between
them.
• Our company shall not be liable for any damages that will
arise when the pro duct is used eith out grounding and
electrical connection in accorddance with the national
regulations.
• Power cable plug must be with in easy reach after installation.
• Do not extension cords or cordless multi outlet between
your product and the wall outlet.
5
EN
Risk of Fire or explosion.
Risk of re or
explosion. Dispose of refrigerator
properly in accordance with applicable
federal or local regulations. Flammable
refrigerant used.
CAUTION :
Risk of re
or explosion due to puncture of
refrigerant tubing; Follow handling
instructions carefully. Flammable
refrigerant used".
Do not make
Damaged power

Publicité

loading

Ce manuel est également adapté pour:

Brft1622ss