Bosch HCB5 651UC Serie Instructions D'installation page 12

Attaching flue duct
Hidden surfaces may have sharp edges. Use caution
when reaching behind or under appliance.
1. Remove the protective foil from both flue ducts.
2. Push one flue duct into the other.
Notes
o To prevent scratches, lay paper over the edges of
the outer flue duct to protect the surface.
o For ducted operation, turn the upper flue duct so
that the ventilation slots point downward.
6. Screw the flue duct to the sides of the angle bracket
using two screws.
C
/
/
3. Remove the protective foil from the extractor hood.
4. Place flue ducts on the appliance.
5. Push the inner flue duct upwards and attach it to the
angle brackets on the left and right.
A Upper flue duct
B Lower flue duct
C Screws
D Angle bracket
7. Fasten the lower part of the flue duct using two
screws.
I,
A
8. Install metal grease filter.
Removing the appliance
1. Remove the metal grease filter.
2. Loosen the flue duct.
3. Disconnect the appliance from the power supply.
4. Loosen the exhaust air lines.
5. Loosen screws for fastening the appliance.
6. Remove the appliance.
12