Bort BSS-1415-Aqua Mode D'emploi page 5

3 . Assemble the water cover and water pipe according to
direction instruction . Put the top cover on to the tank and
fix the tank buckle .
4 . Connect the hose onto the vacuum main suction hole .
5 . Connect two parts plastic (telescopic) tubes with the
hose . Connect the floor brush with the tube
6 . Plug and switch on the machine .
7 . Clean the dust tank once the water to the MAX line . Wa-
ter volume should not surpass the "MAX" line
8 . Adjust the hose button to control the airflow .
9 . Take out the HEPA and strainer . Clean the water in the
floater bottom if any . Wash the sponge filter and HEPA,
then dry in the sunshine for next use . Wash the water tank .
Clean the filters often .
5