Gessi iSpa 41401 Mode D'emploi page 23

FUNZIONAMENTO - WORKING - FONCTIONNEMENT - FUNKTIONSTÄTIGKEIT -
Product's operating procedures are reported in the following table and can be executed using the control
Quick Access Handling
Push button 1x, 2x, 3x
shortly
Water ON
Temperature and flow
accord. preset 1.. 3
Turn: adjust temperature
Push and turn: adjust
flow of water
Push button shortly
Water OFF
Remark:
Turn on time max. 10
minutes, afterwards auto-
matic switch OFF.
FuNCIoNAMIENTo - ИСПОЛЬзОВАНИЕ - ΛΕΙΤΟΥΡΓΙΑ - 运行
OPERATING PROCEDURES
Storing Of Quick Access
(preset)
Push button 1x, 2x, 3x
shortly
Water ON
Temperature and flow
accord. preset 1.. 3
Turn: adjust temperature
Push and turn: adjust
flow of water
push button and keep
pushing
Wait till MAUVE lights up.
Release button.
Save current temperature
and flow.
Confirmation by double
flash.
Water OFF
as illustrated.
Cleaning Mode
Push button and keep
pushing
Wait till GREEN lights up.
Release button
Control unit is inactive.
GREEN flashes cyclic.
Push button till GREEN
lapses automatic switch
off after 45 sec.
Control unit ready to
operate.
23
ING
Self check
Push button and keep
pushing
Wait till ORANGE lights
up.
Release button
Arun self check.
1. Adjustment of the
valves.
2. RED lights up→valve
goes to position hot.
3. GREEN lights
up→valves off.
4. BLUE lights up→valve
goes to position cold.
5. valves OFF.
6. double flash→ self
check completed.