Saba DP3716NFWDIX Mode D'emploi page 23

Changing the door hinge
Follow the steps below to change the start position of the door hinge�
Removing the doors
1� Remove the cover of the upper-right hinge using a screwdriver� Loosen the screws and remove
the hinge� Remove the door of the freezer compartment�
GB
2� Loosen the screws of the middle-right hinge and remove; remove the door of the refrigerator
compartment�� Finally, remove the bottom-right hinge by loosening the screws�
Right hinge
Mounting the doors
1� Firstly, secure the bottom hinge to the left-hand side of the refrigerator; place the bottom hole of
the refrigerator compartment door onto the pin of the hinge and ensure that the door is aligned
in relation to the fridge�
18
Position the middle hinge on the left-hand side of the fridge and insert the pin into the upper hole�
Then fix it into place�
2� Secure the hinge to the left-hand side of the freezer compartment door� Place the bottom door
hole onto the pin on the middle-left hinge� Ensure that the door is aligned in relation to the fridge�
Left door hinge
Insert the pin on the upper hinge into the upper hole on the door and secure well� Replace the hinge
cover�
GB
19