Table Des Matières; Important Safety Instructions; Safety Guidelines - Definitions - Biesemeyer T-Square BC30 Manuel D'utilisation

IMPORTANT SAFETY INSTRUCTIONS ......................2
SAFETY GUIDELINES - DEFINITIONS .......................2
GENERAL SAFETY RULES ..........................................3
FUNCTIONAL DESCRIPTION ......................................4
CARTON CONTENTS ...................................................4
ASSEMBLY ....................................................................6
TROUBLESHOOTING .................................................14

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and operating instructions before using any tool or equipment. When
using tools or equipment, basic safety precautions should always be followed to reduce the risk of
personal injury. Improper operation, maintenance or modification of tools or equipment could result in
serious injury and property damage. There are certain applications for which tools and equipment are
designed. Biesemeyer strongly recommends that this product NOT be modified and/or used for any application other
than for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written Biesemeyer and we
have advised you. Contact us online at www.deltaportercable.com or by mail at End User Services, Biesemeyer, PO Box
2468, Jackson, TN 38302-2468. In Canada,125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.org
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1
Safety Requirements for Woodworking Machines
• U.S. Department of Labor regulations www.osha.gov

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR
SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,
may result in property damage.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, al ways wear NIOSH/
OSHA approved, properly fit ting face mask or res pi ra tor when us ing such tools.
TABLE OF CONTENTS
MAINTENANCE ..........................................................14
SERVICE ......................................................................14
ACCESSORIES ...........................................................14
WARRANTY .................................................................15
FRANÇAIS ...................................................................16
ESPAÑOL ....................................................................30
SAVE THESE INSTRUCTIONS!
2