Publicité
Les langues disponibles
Les langues disponibles
USA
GB
55077
MTS Display Module
THE PRODUCT
The MTS Display Module "listens"
to the LGB Bus and displays the
most recent command for its
addresses. It can display the com-
mands for 55025 MTS Switch
Decoders, as well as data from
55070 MTS Feedback Interfaces
and 55075 MTS Train Detection
Modules. By connecting 12070
Supplementary Switches to your
switches and signals, and routing
the feedback via 55070 MTS
Feedback Interfaces, you can dis-
play the actual settings of your
switches and signals. The MTS
Display Module can be used to
power displays, for example, on a
scratch-built control panel.
Attention! Use this product only
with the LGB Multi-Train System.
Caution! This product is not
weather-resistant. Protect this
product from moisture.
Contents
1. Display Module
2. Cable (rectangular phone-style
connector)
3. Adapter (for round connectors)
4. Instructions
THE PROGRAM
With this product, we recommend
the following items:
- 50110 AC Transformer, 5 Amp,
18 Volt, 230 Volt
- 50111 AC Transformer, 5 Amp,
18 Volt, 110 Volt
- 51080 AC Transformer,
0.5 Amp, 18 Volt, 230 Volt
- 51081 AC Transformer,
0.5 Amp, 18 Volt, 110 Volt
- 55070 MTS Feedback Interface
- 55075 MTS Train Detection
Module
- 55110 MTS Remote Adapter
For information on the complete
LGB program, see the LGB cata-
log.
INSTALLATION
1. On one side of the display
module, there are two phone-
8
style sockets marked "LGB-
Bus" (Fig. 1).
First generation MTS Central
Station (8 loco addresses)
- This Central Station does not
provide
enough
directly power the MTS Display
Module.
- Connect the MTS Display Mod-
ule to a 55110 MTS Remote
Adapter with a separate power
supply.
- Connect one of the sockets
marked "LGB-Bus" on the MTS
Display Module with the MTS
Remote Adapter.
- All other MTS controls also must
be connected to the MTS
Remote Adapter, not directly to
the Central Station. If MTS con-
trols are connected directly to
the Central Station, the MTS
Display Module will not "hear" or
display their commands.
Type 2 MTS Central Station
(23 loco addresses)
- Connect the MTS display mod-
ule directly to the Central Sta-
tion.
- Connect one of the sockets
marked "LGB-Bus" on the MTS
Display Module with the Central
Station.
Attention! Do not connect the
55077 to a 55110 MTS Remote
Adapter. The 55077 will not work
reliably.
- Connect additional MTS con-
trols either directly to the Central
Station or to a 55110 MTS
Remote Adapter.
Hint: Use the other socket to con-
nect additional 55077 MTS Dis-
play Modules or other MTS com-
ponents to the LGB Bus.
Caution! Do not connect the
phone-style connectors of MTS
products to your phone system.
The
MTS
destroyed!
Caution! Use only the included
cable to connect the MTS Display
Module. Even other phone cables
can destroy MTS components,
because the wires often are
reversed internally.
2. To the left of the two "LGB-Bus"
sockets, there is a terminal to
power the displays (Fig. 1). The
current
product
will
to
be
Publicité
