Publicité
Les langues disponibles
Les langues disponibles
WARNING:
Flat batteries must not be disposed of with household waste. Care for
the environment. Always prevent access to the product by
unauthorized personnel.
And take them to the collection points provided in accordance with national
or local regulations. The product must not be disposed of with household
waste. Dispose of the product appropriately in accordance with the national
regulations in force in your country.
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" is taken to mean the capability of
the product to function smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present, and without causing
electromagnetic interference to other equipment.
WARNING:
The products conforms to the most stringent requirements of the relevant
standards and regulations. Yet, the possibility of it causing interference in
other devices cannot be totally excluded.
CAUTION:
Never attempt to repair the product yourself. In case of damage, contact the
local dealership.
Laser classification
Integrated distance meter
That produces a visible laser beam which emerges from the front of the
instrument.
It is a Class 2 laser product in accordance with:
IEC60825-1: 2007 "Radiation safety of laser products"
Laser Class 2 products:
Do not stare into the laser beam or direct it towards other people unnecessarily.
Eye protection is normally afforded by aversion responses including the blink reflex.
18
WARNING:
Looking directly into the beam with optical aids ( e.g. binoculars, telescopes)
can be hazardous.
Precautions:
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous to the eyes.
Precautions:
Do not look into the laser beam. Make sure the laser is aimed above or below
eye level. (particularly with fixed installations, in machines, etc.)
Start-up
Inserting / replacing batteries
· Removing battery compartment lid and attach hand strap.
· Insert batteries, observing correct polarity.
· Close the battery compartment again.
· Replace the batteries when the symbol
display.
Only use alkaline or rechargeable batteries.
Removing the batteries before any long period of non-use to avoid the
danger of corrosion.
Menu Functions
Measurements
Button (press long) -- Press once again to change the unit of distance
measurement. The following units are available: m (meter), ft (feet), in (inch),
ft+ / in (feet -inch 1/16).
Beep
Press button (long). You can choose the beep on or off as required.
flashes permanently in the
19
Publicité
