Vito Agro VIBCTPBSFL20 Mode D'emploi page 27

The cordless pruning shears may only be used by people
who have read the instruction manual and are familiar with
its handling.
Pay attention to the area where the appliance will be used
and check for potential obstacles, objects (coiled wires,
metal parts). In case it is not possible to remove these
objects or obstacles, mark them so that they do not come
into contact with the cutting accessories when using the
equipment.
Before starting the cordless pruning shears:
▪ Carry out an inspection to ensure correct assembly of the
pruning shears, safety issues and good performance of
the appliance;
▪ Check that the safety devices are in perfect condition
and function properly. Never use the power tool if the
safety devices are missing, inhibited, damaged or worn
out;
▪ Replace defective parts and all other worn out and
damaged parts;
▪ After the accessories' assembly and before using the
power tool, test it at full speed with no load for a while.
Check for moving parts misalignment or any other
condition that may affect the cordless pruning shears.
Check that all moving parts run smoothly, without
abnormal noises;
▪ Carry out all the necessary adjustments and work. If you
have any questions or difficulties, contact your official
VITO distributor.
Keep third parties at least 5m away from the cordless
pruning shear's area of operation. Never work while
animals or people, especially children, are in the danger
zone. When using a cordless pruning shears, particles can
fly-off at high speed which can cause injury.
Also keep a safe distance from objects (vehicles and glass)
in order to avoid material damage.
When two or more people are working simultaneously in the
same area, they must keep a safe distance in order to
prevent accidents and injuries.
Work only in daylight or with good artificial lighting. Do not
operate the cordless pruning shears at night or when it is
not possible to have a clear view of the work area.
Never work with the cordless pruning shears when adverse
meteorological conditions such as dense fog, rain or strong
wind, storms or lightning.
When operating the pruning shears, stand in a stable
position and always keep your balance.
Keep all parts of your body away from the blade while using
the cordless pruning shears.
Always wear personal protective equipment and clothing.
Wearing a visor or goggles, dust mask, hearing protection,
anti-slip safety shoes, long-sleeved clothing, gloves,
helmet and shin guards properly reduces the risk of injury.
Clothing worn during the appliance operation must be
adequate, tight and closed, for example, a work boiler suit.
Do not wear loose clothing or jewelry. Keep hair, clothing
and gloves away from moving parts.
Always wear resistant shoes with non-slip sole that covers
the foot completely.
In case of nausea, headaches, sight problems (e.g.
reduced vision), hearing problems, dizziness and
reduced ability to concentrate, stop working immediately.
Plan rest breaks when using the cordless pruning shears
and avoid using it for long periods.