VITO PRO POWER VIPAQ2000 Mode D'emploi page 20

While operating power tools, you should consider
basic safety precautions to avoid the risk of fire,
electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
to ensure your own safety. Always operate the hot air gun
carefully and responsibly. In using the appliance, you
accept full responsibility for any accidents caused to third
parties or their goods during its use.
The power tool may only be used by people who have read
the instruction manual and are familiar with its handling.
Before operating the hot air gun for the first time, users
should be instructed by the seller or any other qualified
person on how to use it.
The instruction manual is considered an integral part of the
power tool and must always be provided.
Familiarize yourself with the control devices and use of the
power tool. In particular, the user must know how to quickly
stop the hot air gun.
Stay alert and use common sense while operating a power
tool. A moment of inattention can result in serious injury.
Do not operate the hot air gun if you are not both physically
and mentally well. Do not operate it while you are tired or
under the influence of medication, drugs or alcohol. If you
have a health problem, ask your doctor if it is safe for you
to use the hot air gun before doing so.
People using cardiac devices (pacemakers) should not
operate this type of power tool or stay near it without
medical advice.
Never allow the hot air gun to be operated by children,
individuals with limited physical, sensory or mental
abilities, individuals with lack of experience and knowledge
of the appliance, or others unfamiliar with the use
instructions.
The hot air gun may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to
the power tool, is not permitted.
Do not overload and misuse the power tool. The use of the
power tool for purposes other than those intended, and the
improper use of accessories can result in hazardous
situations.
For safety reasons, any alterations to the power tool other
than the installation of accessories authorised by the
manufacturer are prohibited. The warranty on your hot air
gun will be voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
Do not operate power tools in explosive environments,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks that can ignite liquids,
gases, or dust.
While the power tool is running, electromagnetic problems
may occur at:
▪ Power cords, pilot, signal and telecommunication
cables, near the power tool;
▪ TV and radios;
▪ Computers and other control units;
▪ Security systems, for example alarm installations;
▪ Pacemakers and hearing aids;
▪ Calibration or measurement devices;
▪ On devices with too low resistance to electromagnetic
interference.