Geemarc CLEARSOUND CL7150 Mode D'emploi page 6

PRODUCT CONTENTS
NOTE:
1. This type of battery should last for many years and normally
should not need replacing.
2. We recommend that the battery be charged for about 2 hours
before the system is used for the first time.
3. Place the headset in the charging cradle. Verify that the LED
charging indicator (RED) is lit. The LED turns off when the
battery is fully charged.
Left cradle
charging
indicator
4. It is not possible to overcharge the battery. We recommend that
the headset be placed in the charging cradle when not in use.
BATTERY WARNINGS
Do not attempt to change or remove the battery
Do not dispose in fire
Keep away from children
Do not short circuit the charging terminals in the
bottom of the headset.
Note: This series of CL7150 products comes in 2 model variations
and spare headsets as below. This Instruction Manual covers all
of them.
1) CL7150 Wireless Single Headset System
2) Extra Wireless Headset
5
Right cradle
charging
indicator