Publicité
Les langues disponibles
Les langues disponibles
FN-114355
PARTS DESCRIPTION
1.
Main body (Fan guard + Fan
blade)
2.
Tube stand
3.
Handle
4.
Speed buttons
5.
Control box
6.
Support for cable storage
OPERATING INSTRUCTIONS:
1.
Plug the power cord into a suitable socket.
2.
The fan is switched on by using the speed buttons on the control box: 0 = OFF, 1 = Low Speed, 2 = Medium
speed, 3 = High speed.
3.
Tilting Angles: turn off the fan, then push or pull the guards to adjust the angle of airflow.
CLEANING AND MAINTENANCE
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
4.
Pack the appliance in its original box and place it in a dry, well-ventilated place when it is not to be used for
a long period of time.
5.
If the appliance is extremely dirty, the front guard and the blade can be removed to clean. Unscrew the set
screw at the bottom of the fan guard and then open the clips to remove the front guard; unscrew the blade
locking nut to take out the blade. Be careful, do not drop the blade! (refer to the picture below)
6.
After cleaning, reassemble the appliance securely.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 70W
- 4 -
EN
Publicité
