Statistical Data - AVE CRONOTC1B Instructions D'utilisation

Masquer les pouces Voir aussi pour CRONOTC1B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Statistical data

The chronothermostat provides a set of statistical data concerning the system
operation. To access this data, proceed as follows:
1. Enter the programming menu main page. The operating mode currently used
will be interrupted temporarily.
Choose the statistical data function.
2. Page 1: number of hours during which the
system was switched on the previous day
(6 hours in the image).
Use the ► button to go to the next page.
3. Page 2: total number of hours during which the system has been switched on
and operating since its first start-up (16 hours in the image).
Use the ► button to go to the next page.
Press the ▲ and ▼ buttons simultaneously
to reset the total system switch-on hours.
4. Page 3: minimum temperature reached on the current day, and time at
which such minimum temperature was reached (15.8°C at 03.15 a.m. in the
image). Use the ► button to go to the next page.
5. Page 4: maximum temperature reached
on the current day, and time at which
such maximum temperature was reached
(22.5°C at 09.08 p.m. in the image).
6. Press the ENTER button twice to go back to
the operating mode previously used.
37
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cronotc2bCronotc3b

Table des Matières