Unpacking; Operating Limitations; Installation Prescription - V.ORLANDI E 50 Instructions De Montage, D'utilisation Et D'entretien

1.2 UNPACKING

Read the following instructions carefully before any operation:
Ensure that the position of the operating handle (22A 22B) is as shown in the
illustration and that the coupling pin (14) is fully visible.
Attention! Risk of a limb injury

1.3 OPERATING LIMITATIONS

The drawbar couplings of the series E50 are suitable for central axle trailers and
steering axle trailers equipped with 50 mm drawbar eyes according to the class D50
of the Directive 94/20/EC and according to ISO 1102.

1.3.1 INSTALLATION PRESCRIPTION

The drawbar couplings of the series E50 can be installed on the drawbeams of
different hole patterns according to the Directive 94/20/EC and according to
3584. The choice of the coupling must be compatible with the drawbeam and
based on the specification sheet of the product.
DRAWBAR COUPLING E 50
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
PAG.
08/32
CHAP . 1
REV. F
ISO