Elcoman KOBRA FLEXPACK PRO Mode D'emploi page 7

Shred
Residual risks
The device may only be used by staff who have
received prior training (IMPORTANT). There is
no such thing as an "intrinsically" safe device,
just as there is no such thing as a worker who,
by simply being careful can "always" avoid
accidents. Therefore never underestimate the
risks associated with the use of this machine and
concentrate on the work you are doing in order
to avoid material damage.
Risks connected with the use of the machine
Even though the KOBRA FLEXPACK cannot be
considered a particularly dangerous device,
never underestimate the risks connected with its
use, even though the manufacturer, by installing
all the safety features in order to make the
machine safe to use, guarantees its compliance
with safety regulations.
Verbal instruction on how to use the machine for
each operator who will be responsible for using
and carrying out maintenance on the machine
does not exonerate the user from reading the
user and maintenance manual.
Electrical hazard
Any work on the electrical parts of the machine
may only be carried out by specialised personnel
authorised by the manufacturer. If maintenance
is carried out by external personnel, it is
necessary to verify that the operator has had
specific training in the maintenance of electrical
systems and appliances, must know the location
of power lines and keep a certain distance from
them, and when the work is completed must
issue a certificate of compliance.
Live working is prohibited.
Unless they have gone through special training,
those authorised to operate the FLEXPACK may
never carry out any type of maintenance.
Do not make changes of any kind to the electrical
parts of the machine. Any attempt to do so may
12
KOBRA FLEXPACK PRO
compromise the operation of electrical devices
and cause malfunctions or accidents and will
void the warranty.
Warnings
• If you hear any strange noises or notice
anything strange, switch off the machine and
immediately notify the person in charge who
will set maintenance procedures in motion.
• Never interfere with moving parts while the
machine is in operation.
• Take the utmost care at every stage of the
operations in order to avoid injury or damage to
things or to the machine itself.
• When the work is finished, clean the work area
and, the with machine switched off, remove any
residual debris.
• Before switching off the machine, check it
is working efficiently so that other operators
do not find the machine in less than perfect
working order the next time it is used.
• Check that technicians only use original spare
parts.
• The KOBRA FLEXPACK is intended for specific
jobs, so do not expect it to do shredding work
for which it was not designed.
• When the KOBRA FLEXPACK is idle for long
periods of time, unplug it from the power
socket.
• Work stations must be kept clean and tidy.
Untidiness can cause accident and injury.
IMPORTANT - Personal protection should be
worn when operating the machine: hearing
protection, protective gloves and safety
glasses.
TAV. A
KOBRA FLEXPACK PRO
Shred
13