Axis Communications F44 Guide D'installation page 15

with a built-in amplifier. A stereo connector must be used
for audio out.
RS232 Connector
5-pin terminal block for the RS232 serial interface used to control auxiliary
equipment. In order to use the RS232 port, a third party application for
AXIS Camera Application Platform is required.
RJ12 Connector
The RJ12 connector is used for connecting the sensor unit to the main
unit. For information on how to shorten the sensor unit cable see Shorten
Sensor Unit Cable on page 10.
SD card slot
NO TICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects
or excessive force when inserting or removing the SD card. Use
your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the
SD card while the product is running. Disconnect power or
unmount the SD card from the Axis product's webpages before
removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see www.axis.com
Control Button
For location of the control button, see Hardware Overview on page 10.
The control button is used for:
• Resetting the product to factory default settings. See page 22.
AXIS F44 Dual Audio Input
15