Technomate TM-5402HD M3 CI Super+ Manuel D'utilisation page 18

6. Operation
6.1 Getting Started
(When the DiSEqC Motor parameter is set as USALS <Figure 6.1.6>)
▪ Sat Degree: Satellite location.
▪ Position Setting: Press OK.
▪ Goto Reference: Move the dish to the reference 0 position.
▪ Antenna Longitude: Your longitude at present.
▪ Antenna Latitude: Your latitude at present.
✽ Note: You need to know what LNB you are using to correctly set the L.O.
(local oscillator) frequency.
✽ Note: You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
6. When you are done, press the EXIT button.
18
Figure 6.1.6 Figure 6.1.7