Télécharger Imprimer la page

Makita VC008G Manuel D'instruction page 15

Aspirateur dorsal sans fil

Publicité

Les langues disponibles

Les langues disponibles

3.
Align the hole of the filter bag with the hose cuff
and push the cardboard portion to the end. Make sure
that the rubber ring on the filter bag goes over the rim
on the hose cuff.
Fig.29
► 1. Rubber ring on the filter bag 2. Rim on the hose
cuff 3. Cardboard portion of the filter bag 4. Hose
cuff
4.
Lock the dust box cover certainly.
CAUTION:
Be careful not to pinch your fin-
gers when hooking the latch, and when closing
the dust box cover.
Harness cover
Optional accessory
When using the harness cover, follow the procedure
below to attach it.
NOTE: When installing the harness cover, be careful
not to make a mistake on the front and back.
Fig.30
1
2
3
4
1.
Spread the harness cover on the harness.
Fig.31
2.
Secure the harness shoulder straps with the hook
and loop fasteners of the harness cover. Hook the band
of the harness cover on the harness to fix it.
Fig.32
OPERATION
WARNING:
instructed on the use of the vacuum cleaner.
WARNING:
able for picking up hazardous dust.
CAUTION:
This cleaner is for dry use only.
CAUTION:
Always insert the battery cartridge
all the way until it locks in place. If you can see the
red indicator on the upper side of the button, it is not
locked completely. Insert it fully until the red indicator
cannot be seen. If not, it may accidentally fall out of
the tool, causing injury to you or someone around
you.
CAUTION:
During operation, be conscious
of the vacuum cleaner on your back. You may
lose your balance if the vacuum cleaner body bumps
against a wall or the hose is hooked by an obstacle.
15 ENGLISH
Operators shall be adequately
This vacuum cleaner is not suit-

Publicité

loading