Publicité
20
Cassette Care
Cassette Insertion
Connect a power source.
Press and slide the cassette eject button.
The cassette holder will open.
Insert a cassette with the window facing
outside.
Close the cassette holder.
wo N a
A
Cassette Ejection
2 Press and slide the cassette eject button.
3 Take out the cassette and close the cassette
holder.
To Prevent Accidental Erasure
Slide out the tab on the cassette so that it
covers the opening. (A red mark will appear.)
To rerecord on the cassette, slide the tab in to
uncover the opening.
Notes
:
+ Don't press the upper lid of the cassette compartment
forcibly when it is moving.
+ When the cassette holder is pressed to close, the upper
lid of the cassette compartment will automatically lower.
Never insert anything in the small holes on the rear of the
cassette. These holes are used to sense the kind of tape,
thickness of tape, or if the tab is out or in, etc.
To record from the beginning of the tape, run the video
camera recorder for about 15 seconds at the beginning of
a cassette before recording. It will avoid missing the
starting point during playback on a video cassette
recorder.
Publicité
