Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
If one or more functions on the bed base have stopped operating:
ADJUSTABLE BASE
•
Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of
the base.
•
Check to ensure the blue LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly
connected.
•
Unplug the base for 1 minute to reset the electronic components.
•
Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is
recommended).
REMOTE CONTROL
•
Ensure that your remote batteries are properly installed or do not need replacing.
•
Remove and replace full batteries in the remote control and re-pair the remote to the base (see page 19).
22
Publicité
