Kaiser Fototechnik RB 555 AS Mode D'emploi page 5

5640Bedien_1022.qxp_5640Bedien 08.11.22 10:51 Seite 5
Netzteil
Input: 100-240 V, 50/60 Hz
Output: 24 V, 4 A
Sicherung: T 4 A
Netzkabel: ca. 2,50 m
_______
* bezogen auf homogene Ausleuchtung einer DIN A3-Vorlage
11. Zubehör
5548 Polfilterfolien für 5547, 2 Stück.
5641 Polfilterfolien für 5640/5652, 2 Stück.
Irrtum und technische Änderungen vorbehalten.
Alle Angaben sind ca.-Werte.
Entsorgen Sie die Produkte am Ende ihrer
Le bens dauer entsprechend den geltenden
gesetzlichen Bestimmungen.
Bitte beachten Sie das Zusatzblatt „Ent -
sor gungshinweise".
ENGLISH
(1) Light
(2) Vertical arm (of 5547/5640)
(3) Clamp base (of 5547/5640)
(4) Soft screen
(5) Mains adapter
(6) Mains lead
(7) Fastening screw for vertical arm (of 5547/5640)
(8) Vertical arm (of 5652)
(9) Fastening screw for vertical arm (of 5652)
(10) Clamp base (of 5652)
(11) Fastening screw for the light (of 5652)
(12) Fastening screw for the light (of 5547/5640)
(13) Connecting cable
(14) Cable clip
(15) Control dial for brightness and ON/OFF
(16) Display
(17) Light synchro cable
(18) Latch release
(19) Plug of light synchro cable
(20) Port for light synchro cable
(21) Port for power supply
(22) Locking screw for the light
(23) ON/OFF switch
(24) Fuse holder
(25) Fuse
Prior to using your surface lighting unit, please read these
instructions carefully. Keep them safe to have them at hand
at any time. If you pass the devices on to somebody else,
always include these instructions.
1. Intended use
The RB 555 AS (5547), RB 560 AL (5640) and RB 570 AX
(5652) surface lighting units are marketed for the purpose
of illumination for image capture. They are not intended for
use in other applications.
They are equipped with clamp bases for attachment to
Kaiser copy stands. The 5547 surface lighting unit is de-
signed for the R1 system and RD system (5602, 5603),
5640 for the R1 system and RD system (all models) and
5652 for the rePRO system and RD system (5600).
The lighting units can also be attached to boards up to 48
mm (1.9 in.) ( 5547, 5640) or 55 mm (2.2 in.) (5652) thick-
ness.
Use the surface lighting unit only as described in these in-
structions. Any other use has to be considered as not as
intended and can result in material damage or physical in-
jury. The surface lighting unit is not a toy.
Kaiser takes no responsibility for damages caused by not
intended or incorrect use.