Publicité
Les langues disponibles
Les langues disponibles
5. The hub will communicate with the
battery pack installed on the dock to
evaluate the condition of the battery
pack. When the battery pack meets
the charging conditions, the hub
will begin charging the battery pack
and the hub status indicator and the
battery-bay status indicator (above
the inserted battery pack) will flash
green.
6. Insert more battery packs into the docks.
7. When connecting more docks to the hub, the hub will supply power to the
docks in the order of proximity – the dock nearest to the hub is powered first.
The flashing green battery-bay status helps identify which battery is currently
charging.
8. When the battery packs are fully charged, the hub status indicator and the
battery-bay status indicators will glow solid green. The "fuel gauges" on the
battery packs will go out. It is recommended to disconnect the hub from the
power supply, if it is not going to be used for a long period of time.
NOTE:
◾
A significantly reduced run time after fully charging a battery pack indicates that
the battery pack is near the end of its usable life and must be replaced.
◾
The hub, dock and power bank may get warm during charging. This is part of the
normal operation. Charge in a well-ventilated area.
NOTE:
For the charging sequence of the battery packs in the same dock/power bank,
refer to the operator's manuals of EGO Dock PGX3000D/PGX3000D-FC and EGO Power
bank PGX1400PB/PGX1400PB-FC.
PGX
COMMERCIAL CHARGING 1600W HUB — PGX1600H/PGX1600H-FC
™
3b
b
a
19
Publicité
