Note: Turn off the switch and unplug the electrical cord before servicing.
!
Problem
Motor will
Electric plug
not start
Power switch not
turned ʺONʺ
No suction at
Full paper bag
end of hose
Paper bag clogged
Hose clogged
Front cover not
latched
Reduced
Full paper bag
suction
Slip ring open
Hose clogged
Cleaner
Internal safety
shuts off
thermostat trips
(see page 3 for
details)
General
Assembly
questions
or related
attachments
Problem solving
Cause
• Push plug securely into outlet
• Try another outlet
• Check circuit breaker
• Make sure power switch is "ON"
• Replace paper bag
• Remove any clogs from hose that restrict airflow,
then try again
• Push front cover until it latches firmly
• Replace paper bag
• Rotate slip ring on wand until hole is covered
• Remove any clogs from hose that restrict airflow,
then try again
• Unplug cleaner and check for obstructions in
hose, wands and attachments
• Check for full paper bag
• Clean/replace motor filter
• Call Eureka Customer Service HELPLINE 1-800-
282-2886 Know the Model number and Serial
number when you call.
Solution
www.eureka.com
9