Télécharger Imprimer la page

Goldstar M1804R Manuel D'utilisation page 11

Publicité

Les langues disponibles

Les langues disponibles

Suggested Tool Requirements
SCREWDRIVER(+,-),
RULER, KNIFE, HAMMER,
PENCIL, LEVEL
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at
both sides and at the back.
2, Slide the unit out from the cabinet by gripping the
base
pan handle
and pulling
forward
while
bracing the cabinet,
3. Cut the window sash sea] to the proper length, Peel
off the backing and attach the Foam°PE to the
underside of the window sash.
Shipping screws
4. Remove the backing from Foam-PE with 3 holes
and attach it to the bottom of the Top retainer bar,
5, Attach the Top retainer bar on the top of the
cabinet with 3 screws (Type A),
6. Insert the Frame guides into the bottom of the
cabinet.
7. Insert the Frame Curtain into the Top retainer bar
and Frame guides.
Fo_m-PE
Top retorter bar
8, Fasten the cu_ains to the unit with 10 screws
(Type A) at both sides,
Top retainer bar
--Frameguide
Screw(Type A)

Publicité

loading

Ce manuel est également adapté pour:

Wg1800rWg2400r