LENCO PMX-350 Mode D'emploi page 10

TUNER APPLICATIONS
1. Before using the radio functions, you must adjust the antenna to obtain optimum reception.
Press the INPUT A key on the front panel or the FM key on the remote control, to select "FM"
function.
2. Press the AUTO key on the remote control or the play button of the INPUT A control panel.
The machine will scan radio channels from low- frequency to high-frequency by itself and stores the
channels found one by one.
3. Press the CH+/CH- key on the remote control to change radio presets that have been stored
previously.
4. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
5. To select radio stations from the control panel, press and hold the next/prev buttons.
KARAOKE & GUITAR FUNCTION
1. The machine can auto detect whether a MICROPHONE or GUITAR is connected.
Please turn off the microphone volume with the MIC.VOL knob on the front panel and adjust the
volume gradually after inserting the microphone.
2. Adjust the ECHO knob on the front panel to change the microphone ECHO.
3. Adjust the GUITAR VOL knob on the front panel to change the guitar VOLUME.
Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.
BLUETOOTH PAIRING AND CONNECT
• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth feature on your phone or music player.
• Turn on and set this unit to Bluetooth mode. The flashing blue light "BT" on LED display indicates it is
in pairing mode.
• Set your phone or music player to search for Bluetooth devices.
• Select 'PMX-350' from search results on your phone or music player.
• Select OK or YES to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey steady blue light indicates successful connection.
• Press the DISCONNECT key on the remote control to disconnect the Bluetooth.
10
OPERATING