Setting The Clock - Teac DR-H300 Manuel Du Propriétaire

1 If the unit is on, press the STANDBY/ON switch to turn
it standby.
2 Press the CLOCK button.
(If "- -:- -" blinks on the display, press the CLOCK button
again.)
"CLOCK SET" briefly appears on the display, and the "hour"
value starts blinking.
< If no button is pressed for 10 seconds, the time setting mode
will be cancelled.
3
Press the VOLUME button to set the current hour.

Setting the Clock

4 Press the CLOCK button.
The "minute" value starts blinking
5 Press the VOLUME button to set the current minute.
6 Press the CLOCK button.
The clock starts.
41