Candy CBL3518F Mode D'emploi page 6

Fine Tuning
The fine tuning selection mode gives the possibility to set the temperatures by sublevels; each
temperature level has four sublevels.

Press the Mode key for 8 seconds, to enter fine tuning selection mode. When the appliance
enters the mode, an acoustic signal is made and the LED of currently selected cooling level
blinks.

By short pressing the Mode key within 5 seconds, the fine tuning setting increases and, at
each pressing, an acoustic signal is made.

During fine tuning, the LED of the selected cooling level is fixed, while the LED of the
selected sublevel blinks.

If no key is pressed for 5 seconds, the system will automatically exit from fine tuning
selection mode. The fine tuning setting is saved and the LED of the selected fridge
temperature is fixed.

If the fine tuning is activated again, the setting will be starting from the previously stored
level.
Super Cool function
It is suggested to switch on the Super Cool function if a large quantity of food should be stored (for
example after the purchase). The Super-Cool function accelerates the cooling of fresh food and
protects the goods already stored from undesirable warming. The temperature is automatically set at
the minimum temperature for the fridge compartment.
How to use the Super Cool function:

The function can be activated by pressing many times the Mode key until the Super Cool
LED is turned ON.

To exit the Super Cool function, press the Mode key again.

The Super Cool function automatically ends after 24 hours running.

When the Super Cool ends, the icon of the control panel is switched off and the previously
set cooling level will be restored.
Eco mode
The Eco mode can be activated to optimize the performance of the appliance, whereas obtaining the
best food storage, by setting the best combination of fridge and freezer temperatures.
How to activate the Eco mode:

The function can be activated by pressing many times the Mode key until the Eco mode
LED is turned ON.

To exit the Eco mode, press the Mode key again.

To exit the Eco mode, press the Mode key again; the previous temperature setting will be
restored. The Eco mode automatically ends when another function is chosen from the
control panel.
EN 4