Publicité
Les langues disponibles
Les langues disponibles
Problem
The cycle is shorter
than the time displayed.
The cycle is longer than
the time displayed.
The washing results are
not satisfactory.
You cannot set an op‐
tion.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
13.3 Service
We recommend the use of original spare
parts.
When contacting the Authorised Service
Centre, make sure that these data are
14. TECHNICAL DATA
Dimension
Electrical connection
Level of protection against ingress of solid parti‐
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply pressure Minimum
Water supply
Maximum Load
Possible solution
The appliance calculates a new time according to the laun‐
dry load. See the 'Consumption Values' chapter.
An unbalanced laundry load increases the duration time.
This is a normal behaviour of the appliance.
Increase the detergent quantity or use a different deter‐
gent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
Make sure that you press only the wanted button(s).
Width/ Height/ Depth/
Total depth
Voltage
Overall power
Fuse
Frequency
Maximum
1)
Cotton
available. You can find the information
on the rating plate: model, PNC and
Serial Number. (Mod., Prod. No., Ser.
No.)
600 mm/ 850 mm/ 520 mm/ 576
mm
230 V
2200 W
10 A
50 Hz
IPX4
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cold water
7 kg
ENGLISH
23
Publicité
