Publicité
20
English
Adjust the Rotational Limit
Stop
Adjust the rotational limit stop if:
• The maximum output temperature is greater
than 120°F or that permitted by local plumb-
ing code
• The temperature of the incoming hot or
cold water supply changes seasonally, or if
changes are made to the water heater.
Turn the rotational limit stop, clockwise to
make the water cooler, counter-clockwise to
make it warmer.
Depending on local conditions, each notch
represents a change in temperature of 4°F
- 16°F.
Continue the installation.
Publicité
