Inventum WS308B Mode D'emploi page 8

3
before first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation.
Place the enclosed batteries - 2 x 1,5 V AAA - in the batterie compartment on the bottom of the kitchenscale.
Wipe the outside of the kitchenscale only with a damp cloth.
4
weigh
Put the appliance on a flat and stable surface. This kitchen scale has sensor touch control. The keys are activated by the touch of a
finger. The sensor touch control functions also with the lid/bowl on the scale.
Switch the scale on by touching the
untill «0 g» appears on the display. The kitchen scale is now ready for weighing.
Place the item to be weighted directly on the scale. The weight there of is displayed immediately.
To select a different measurement unit press the UNIT key to change it
accordingly to:
g = grams, lb = pounds, oz = ounces, ml = milliliter.
The scale can accept a maximum load of 10.000 grams or 10.000 milliliters.
The weight measurement is displayed in 1 g divisions. And the scale has a
'tara' adding function. Remove the overweight when «EEEE» appears in the
display. NOTE: The total weight placed on the scale can not be more than
10.000 grams.
The scale has a suspension eye at the back of the scale. Hang the scale on a screw or hook (not included) to a wall for easy storage.
5
adding function
With the adding function you can reset the display to «0 g» after placing a product. This allows you to weigh in a bowl. Do as follows:
1. Place an empty bowl on the scale.
2. Press the scale on with the
3. Place the first product you wish to weigh in the bowl.
4. Read the weight shown on the display.
5. After weighing, press the
By repeating step 3, 4 and 5 you can weigh multiple ingredients (e.g. baking ingredients).
Note: «EEEE» appears in the display if more than 10.000 grams in total is placed on the scale.
• English
8
/TARE key. The entire display will light up. Wait about 2 seconds
/TARE key and wait till «0 g» appears on the display.
/TARE key to reset the scale to «0 g» and you can add the next ingredient.