INVENTOR MP850S-BS Manuel D'utilisateur page 11

Reversible Door
The door opening can change from either the left or the right side, according to what
is best suited for its location. Ensure there is enough adequate space for the door to
open fully. To change the door opening direction, please follow the mentioned below
instructions:
Required tools:
Head Screwdriver / Slot head Screwdriver / Hexagonal Spanner
• Before reversing the door swing, unplug the appliance from the power supply
and remove goods from fridge.
2.
Remove the plastic hard cover
located on top of the mini fridge, to
have access on the door hinge, unscrew
the screws and the stabilizing pin.
EN
1.
Adjust the two leveling feet to their highest
position. Tilt the unit slightly backwards to take the
will not slip during the door reversing process.
damage the coolant system.
3.
access to the front bottom bracket.
Unscrew the screws located on the
bottom left or right (depending on
initial door installation side) and
remove the foot from the opposite
side. Once top and bottom screws and
also the opposite foot are removed,
the door will be completely released.
Slightly tilt so that you may have
11