Lovibond Tintometer Group MD100 Mode D'emploi page 29
Masquer les pouces
Voir aussi pour Tintometer Group MD100:
- Mode d'emploi (292 pages) ,
- Manuel d'instructions (70 pages) ,
- Mode d'emploi (76 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Methods
GB
Notes:
1. Strong alkaline or acidic water samples must be adjusted between pH 3 and pH 5 before
the reagent is added (use 0.5 mol/l Sulfuric acid resp. 1 mol/l Sodium hydroxide).
2. Before using clean the vials with Hydrochloric acid (approx. 20%). Rinse thoroughly with
deionised water.
Reagent
Set
VARIO Molybdenum 1 LR F20
VARIO Molybdenum 2 LR
Mixing Cylinder
MD100_7 07/2016
Form of reagent/Quantity
Powder Pack / 100
Liquid reagent / 50 ml
25 ml
Order-No.
535450
19802650
29
Publicité
Chapitres
Table des Matières
