Publicité
Les langues disponibles
Les langues disponibles
Removing
When Images are not Displayed
Make sure that the screws on the interface board are tightened securely.
•
中
文
•
Make sure that the projector's [Video Terminal Settings] are correct. For details, see the
guides supplied with the projector.
简
Check that the projector or the interface board is using the latest rmware version. For
•
体
inquiries, use the contact details provided in the guides supplied with the projector.
中
文
繁
體
8
Loosen the xing screws (4 points) with a
A
commercially available No. 2 cross-head
screwdriver.
Grip the knob, and pull the interface board
B
straight out.
Make sure the slot cover or an interface
board is always installed in the slot. If dust or
trash enters the projector, it could cause a
malfunction.
Caution
Publicité
