Water Reservoir - Sharp TE-T56U-GR Manuel D'utilisation

P A R T S A N D H A N D L I N G

Water Reservoir

Water
level
Handle
NOTES:
1. Water level markings indicate water needed for
the corresponding cups of brewed tea.
2. Do not fill the water reservoir over the MAX mark (4)
3. Do not add any liquid (milk, etc.) other than fresh cold
water into the water reservoir.
4. Do not add water into the water reservoir during the
boiling process. (Exceeding the maximum number of
cups will cause the tea container to overflow.)
5. Do not pour water into the water reservoir while it is in ma in unit.
6. Do not remove the water reservoir from the main unit after i t has been filled with water.
7. After use, empty the water reservoir and wash the water reservoir and lid.
Tea Container
Lid
Lid cover
(Do not remove)
Rubber seal
(Do not remove)
Rotary blade
(with a magnet)
(See page E-18)
Handle
Removal
Hold down the tea container
removal button, and
carefully pull the container
toward you.
Installation
Push the container in until
you feel it click into place.
NOTE:
To prevent scalding yourself, do not remove
the container while the water is boiling or
immediately after.
Inside the container, there are 2 kinds
of lines, 冷茶(cold tea) and ラテ(latte)
NOTES:
1. The markings indicate water/ milk
required for the corresponding cups
of brewed tea.
2. Do not fill the container over line 4 for
cold tea, and line 3 for latte.
3. Do not put any ice in the container.
4. Do not pour water/milk into the container
while it is inserted in the main unit.
Lid / Lid cover
Adding the powdered tea
1. Keep the container secure in
the main unit. Slide the lid
cover to reveal an oval
opening on the right side.
2. Add the powdered tea
into the container through
the opening.
Adding the powdered tea to water/milk
(for cold tea and latte)
1. Remove the
container from
the main unit.
2. Open the lid. Add the
liquid and the powdered
tea into the container.
3. Return the lid to its
original position.
E-4
Grip the handle while
Removal
holding the main unit with
your other hand.
Securely insert the water
Installation
reservoir into the main
unit.
Water
MAX
Lid cover