Sharp TE-T56U-GR Manuel D'utilisation page 23

C A R E A N D C L E A N I N G
4
Insert the dial into the tea case so that the ridge of the dial align with the white line on the tea case.
Then press the dial into the tea case and turn the dial clockwise.
Dial
NOTES:
1. If you cannot insert the dial, then steps
Re-assemble the Tea Mortar from step
Spatula: Make sure that "オモテ [front]" is face-up.
●
Lower Mortar: Make sure to align the holes on the bottom with the protrusions of
●
Upper Mortar unit: Make sure it is in the correct position.
●
2. We recommended setting the dial to "COARSE" when you store the Tea Mortar.
(This prevents the upper mortar unit and lower mortar from sticking together.)
5
Set the lid.
Lid
1
to
1
while paying attention to the following:
the tea case.
Match
3
have not been carried out properly.
E-22
Ridge of the dial
White line of the tea case