Sony BRAVIA KD-65AF8 Guide De Référence page 12

Installing the TV to the Wall
This TV's instruction manual only provides the steps to prepare the TV for Wall-Mount installation
before it is installed on the wall.
To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for
withstanding the TV's weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or
licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any
damage or injury caused by mishandling or improper installation.
Use the Wall-Mount Bracket SU-WL450 (not supplied) to install the TV to the wall.
When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation Guide
supplied with the Wall-Mount Bracket. Be sure to use the black screws
for Wall-Mount Bracket SU-WL450 installation.
Note
• You can remove the foot parts and screws after the TV is completely installed to the wall.
• Be sure to store the removed foot parts and screws in a safe place, keeping them away from children.
• Be sure to attach the foot parts and screws at original position when using the Table-Top Stand. If using an electric
screwdriver, set the torque at approximately 0.4 N·m {4 kgf·cm}.
For instructions on Wall-Mount Bracket installation, see the Installation Information (Wall-Mount Bracket) on the
product page for your TV model.
www.sony.eu/support/
12
GB
(supplied with the TV)
Foot part
Screw