Sony BRAVIA XBR-75X900E Manuel De Référence page 5

2
Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV's rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
XBR-75/65/55/49X900E
Screw hole on the rear cover
Rope or chain (not supplied)
2
2
Screw (not supplied)
M6 machine screw
(previously removed)
XBR-75X850E
XBR-65X850E
Screw hole on the rear cover
Rope or chain (not supplied)
Screw (not supplied)
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please see below
illustration.
8 mm - 12 mm
Screw M6
Rope or chain
TV's rear cover
M6 machine screw
(previously removed)
5
US
US