Dri-Eaz F174-115V Manuel Du Propriétaire

This Dri-Eaz airmover will ventilate confined spaces or propel dry air across large open areas to aid in drying.
Improve indoor air quality; remove unwanted odors. May be used with up to 125 ft. of semi-rigid ducting.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING! To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING! Unit must be grounded. Do
not use with an extension cord. Connect only to an outlet pro-
vided with a ground fault interrupting device.
WARNING! Do not touch grills when unit is operating.
NOTICE: Keep motor dry. For indoor use only.
NOTICE: Unplug when not in use or when moving unit.
NOTICE: Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
NOTICE: Always operate the unit on a stable, level surface so
it cannot fall and cause injury.
WARNING! Do not alter or modify the product in any way. Use
only replacement parts authorized by Dri-Eaz Products, Inc.
Modifications or use of unapproved parts could create a hazard
and will void your warranty. Contact your authorized Dri-Eaz
distributor for assistance.
WARNING!
a) Do not operate any fan with a damaged cord or plug. Dis-
card fan or return to an authorized service facility for examina-
tion and/or repair.
b) Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
BEFORE YOU BEGIN
Warranty registration
Please visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using, maintain-
ing or servicing your equipment and to contact you in case we
have important safety information concerning your Dri-Eaz
product. If you determine service is required, have your equip-
ment model, serial number and original proof of purchase
available and call your distributor for assistance with obtaining
a return material authorization (RMA).
07-00211D F174-115V
Axial Airmover
Owner's Manual
Model F174-115V
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: 800-932-3030 Fax: 360-757-7950 www.dri-eaz.com
Patents: http://www.LBpatents.com
OPERATING INSTRUCTIONS
The Vortex Axial Fan is designed for air ventilation, circulation,
and extraction, and for drying of wet materials and structures
with airflow.
When operating the Vortex, note the airflow arrow on the hous-
ing, indicating which way the air moves. The Vortex can be
used with or without attached ducting. It is useful for either
positive or negative airflow, that is, blowing air into or extract-
ing air from spaces.
Inspect the inlet and outlet screens before plugging in the unit,
and remove any debris that may restrict airflow.
When Used with Ducting
Do not install ducting when the Vortex is operating. To install
ducting, first note the direction of airflow. Place end of ducting
over the duct ring and attach securely. Ducting to fit the Vortex
is available from your Dri-Eaz distributor. Ducting has quick
1 Dri-Eaz Products, Inc.