Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
to accelerate the evaporation of moisture from structural and other materials.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING! To reduce the risk of fire or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING! Unit must be grounded. Do not
use with an extension cord. Connect only to an outlet provided
with a ground fault interrupting device.
WARNING! Never operate a unit with a damaged power cord, as
this may lead to electrical or fire hazards. If power cord is
damaged, it must be replaced by a cord of the same type and
amperage rating.
WARNING! Do not touch grills when unit is operating.
NOTICE: Keep motor dry. For indoor use only.
NOTICE: Unplug when not in use or when moving unit.
NOTICE: Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
NOTICE: Always operate the unit on a stable, level surface so it
cannot fall and cause injury.
WARNING! Do not alter or modify the Stealth AV3000 in any
way. Use only replacement parts authorized by Dri-Eaz
Products, Inc. Modifications or use of unapproved parts could
Fig. A: Parts Identification
Carry handle
Outlet grill. Keep
clear of obstructions.
07-02212B F568-SP
Owner's Manual
Stealth AV3000 Air Mover
SERVPRO
Manufactured by Dri-Eaz for SERVPRO Industries, Inc.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: +1 800-932-3030 Fax: +1 360-757-7950 www.dri-eaz.com
The Stealth produces high-velocity airflow for ventilation and
Patents: http://www.LBpatents.com
®
Item no. 606 (F568-SP)
create a hazard and will void the product warranty. Contact an
authorized Dri-Eaz distributor for assistance.
WARNING!
a) Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair.
b) Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
Warranty registration
To process a warranty or repair claim, just click the "RMA/
Warranty Form" listed under the "Products" tab on the
®
SERVPRONET
home page or it is also found at the Equipment
page on SERVPRONET.
You may contact the SERVPRO
866-885-6833 or via email at rma@servpronet.com.
To expedite the warranty claim process, please have the
following:
• Equipment model number
• Serial number
• Usage hours (if applicable)
1
®
RMA Department by phone at
Inlet grill. Keep clear
of obstructions.
Hour meter
Variable speed control
Circuit breaker reset switch
Power outlet socket
Tighten knob to secure
fan orientation.
Cord wrap. Wind cord
around housing in groove.
Secure cord with plug clip.
Dri-Eaz Products, Inc.
Publicité
Manuels Connexes pour Dri-Eaz SERVPRO Stealth AV3000
Sommaire des Matières pour Dri-Eaz SERVPRO Stealth AV3000
- Page 1 WARNING! Do not alter or modify the Stealth AV3000 in any • Equipment model number way. Use only replacement parts authorized by Dri-Eaz • Serial number Products, Inc. Modifications or use of unapproved parts could • Usage hours (if applicable) Fig.
- Page 2 Please visit warranty.drieaz.com to register your product. After receipt of the completed Warranty/RMA Request Form, an Registration allows Dri-Eaz to better assist with operation, RMA Coordinator will check warranty status on any listed maintenance, servicing of equipment, and to contact you in case equipment prior to submitting the claim information to the vendor(s).
- Page 3 Rotomolded polyethylene and injection Construction molded ABS housing components; steel wire inlet and outlet grills. Safety ETL listed to UL/ULc and CSA standards Specifications are subject to change without notice. Some values may be approximate. 07-02212B F568-SP Dri-Eaz Products, Inc.
- Page 4 (RMA, por sus siglas en inglés) de para que no pueda caerse y causar lesiones. ¡ADVERTENCIA! No altere ni modifique de manera alguna el Stealth. Utilice sólo piezas de repuesto autorizadas por Dri-Eaz Fig. A: Identificación de las partes Parrilla de entrada.
- Page 5 (Fig. A). Durante su transporte, asegure la unidad cuidadosamente para evitar daños o desplazamientos, así como lesiones a los ocupantes del vehículo. 07-02212B F568-SP Dri-Eaz Products, Inc.
- Page 6 Construcción inyección; cable de acero de entrada y salida de las parrillas. Seguridad ETL probado según las normas UL / CSA Las especificaciones están sujetas a cambios sin previo aviso. Algunos valorespueden ser aproximados. 07-02212B F568-SP Dri-Eaz Products, Inc.
- Page 7 DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road, Burlington, WA 98233, É.-U. Tél. : +1 800-932-3030 Téléc. : +1 360-757-7950 www.dri-eaz.com Le Stealth produit haute vitesse d’air de ventilation et de refroidissement et d’accélérer l’évaporation de l’humidité des matériaux structurels et autres.
- Page 8 Nettoyer le boîtier et le rotor. Si une accumulation de poussière est visible à l’intérieur, enlever les quatre fixations à vis de la grille de sortie tel que montré (Fig. B). Nettoyer l’ensemble du rotor et 07-02212B F568-SP Dri-Eaz Products, Inc.
- Page 9 ABS moulé par injection; grilles d’entrée et de sortie en fil d’acier. Sécurité ETL liste pour les normes UL/ULc et CSA Les caractéristiques peuvent être soumises à des modifications sans notification. Certaines valeurs peuvent être approximatives. 07-02212B F568-SP Dri-Eaz Products, Inc.