Danby Designer DMW099BLSDD Guide D'utilisation Et Soins De Propriètaire page 11

MEMORY
FUNCTION
1) Press "MEMORY" to choose memory procedure
1-5. The LED will display 1, 2, 3, 4, 5 in turn.
2) If the procedure has been set, press
"START/+30SEC." to use it. If not, continue to
set the procedure (only 1 or 2 stages can be set).
3) To set the procedure;
a) For example, to cook food at 80% microwave
power for 3 minutes and 20 seconds as your
memory 2: from a waiting state press
"MEMORY" twice until screen displays "2".
b) Press "POWER" three times until PL8 displays.
c) Press number keys "3", "2", "0" in turn to input the
MULTI-STAGE
COOKING
A total of 2 stages can be set in Multi-stage cooking.
In multi-stage cooking, if one section is defrosting, it
will automatically be placed as the first stage. When
the first stage finishes, one beep will sound and the
next stage will begin cooking.
Example: If you want to cook with 80% microwave
power for 5 minutes + 60% microwave power for 10
minutes:
1) Press "POWER" three times until PL8 displays, to
choose 80% microwave power.
CHILD-SAFETY
LOCK
TO LOCK: While the microwave is nonoperational, press and hold "STOP/CLEAR" for three seconds; the
microwave will sound a long beep, denoting the entering into the child-safety lock state; the LED will display
" " (Lock indicator is displayed)
TO UNLOCK: From the locked state, press and hold "STOP/CLEAR" for three seconds; the microwave will
sound a long beep, denoting that the microwave is now unlocked.
INQUIRING
If you wish to inquire as to what microwave power level your food is currently cooking at;
1) During operation, press "CLOCK/PRE-SET"; the LED will display the clock for three seconds.
2) Press "POWER" to inquire what the microwave power level is; the current microwave power will display.
After three seconds, the display will revert back to show operating time remaining.
NOTE: In multi-stage state, you can determine what power level is operating by following the above steps.
OPERATION
cooking time.
d) Press "MEMORY" to save the setting. Buzzer
sounds once then microwave returns to a waiting
state. If you press "START/+30SEC." after the
above step, the procedure will be saved as memory
2 and operated.
NOTE: If power is lost (i.e. electrical outage) you
will need to reset your memory functions. Otherwise
the procedures will be saved.
e) If you want to run the saved procedure, from a
waiting state, press "MEMORY" twice; screen
will display "2", then press "START/+SEC." to
run.
2) Press number keys "5", "0", "0" to set the cooking
time of 5 minutes.
3) Press "POWER" five times until PL6 displays, to
choose 60% microwave power.
4) Press number keys "1", "0", "0", "0" to set the
cooking time of 10 minutes.
5) Press "START/+30SEC." to begin cooking.
10